We are looking to sell a Sheffield Cordax RS-50 DCC for $5,000.
It is currently in a disassembled state. If you have seen the pictures in the General section of the Forums, you'll know what I'm talking about. It's the thread that says, "Need to find some information on a Sheffield Cordax RS-50 DCC".
I'll be happy to email you any pictures you'd like (we have about 40). Here are a few you can view (they are also in our photo album on SWL).
[
http://www.cmmguys.com/forum/picture...87197&thumb=1]
[
http://www.cmmguys.com/forum/picture...87151&thumb=1]
[
http://www.cmmguys.com/forum/picture...87151&thumb=1]
[
http://www.cmmguys.com/forum/picture...87151&thumb=1]
[
http://www.cmmguys.com/forum/picture...87096&thumb=1]
[
http://www.cmmguys.com/forum/picture...87096&thumb=1]
[
http://www.cmmguys.com/forum/picture...87096&thumb=1]
[
http://www.cmmguys.com/forum/picture...86821&thumb=1]
[
http://www.cmmguys.com/forum/picture...86821&thumb=1]
[
http://www.cmmguys.com/forum/picture...86821&thumb=1]
Here's what we know we have based on model numbers we've been able to sort through:
Sheffield Measurement Processor Cabinet (Over 6 feet tall about 2 feet wide 2 feet deep, approx).
Inside the cabinet there is:
Renishaw Probe Interface PI12
Renishaw Power Supply Unit PSU9
An Interlogic board ATBPK08 9910 that also has 3 cards/plug-ins
On the card that looks to be a processor card we have these numbers: 9700718-0002A 4B6HS LP 000090 There are chips on the card that have these numbers: F84041, W84041 9812 HM08D17T (not sure if those are important or not).
We also have a
Renishaw PH9A Probe that has these numbers on it: 0-105 B-180+B and another attachment that says
RB-4-89-26 Looks like a long spike with a metallic ball on it.
The bridge is present as well as the controller (looks like a joystick).
We do not have any software or manuals with the item.
Everything has been taken apart. We have many parts that haven't been listed. If there is a part that should be there or that you are interested in, contact us.
We are looking to get $5,000 for the unit in it's current state and we'll ship it all to you.
If you a have any questions or would like to see some photos, please contact us at 520-747-2083 or email us at
sales@swliquidators.com.
Or post on the thread and we'll gladly respond.
Thanks.
Matt
SWL